Keysigth Technologies N4903B J-BERT

dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ [e-mail] ▪ www.datatec.de
23
23 | Keysight | J-BERT N4903B High-Performance Serial BERT, 7 Gb/s and 12.5 Gb/s - Data Sheet
rdering Instructions
J-BERT N4903B high-performance serial BERT
Includes six 50- SMA terminations ten adapters 3.5 mm female to 2.4 mm male ESD protection it commercial calibration report
and certicate 6 getting started guide SB cable eyboard mouse and eysight I/ library.
Warranty 3 year return-to-Keysight warranty
3 year return-to-Keysight warranty extended to 5 years
R-51 B-001-Z
R-51 B-001-5Z
Calibration Keysight calibration upfront support plan
3 year coverage
Keysight calibration upfront support plan
5 year coverage
R1282: R-50C-011-3
R1282: R-50C-011-5
Productivity Productivity assistance, remote or on-site R1380-N49xx PS-S20 and PS-S10
Table 31. arranty calibration and productivity services
J-BERT Options Description BERT with built-in and
tunable CDR N4903B
Pattern Generator
N4903B
Data rate 150 Mb/s to 12.5 Gb/s
150 Mb/s to 7 Gb/s
Extended data rate for pattern generator up to 14.2 Gb/s
N4903B-C13
N4903B-C07
N4903B-G13
N4903B-G07
N4903B-D14
3
Generator capabilities PRBS and pattern on aux data output
Half-rate clock with variable duty cycle
N4903B-002
N4903B-003
Jitter tolerance options RJ, sRJ, PJ1, PJ2, SJ, BUJ injection
SSC, rSSC generation
Interference channel
(includes short cable kit N4915A-008)
Jitter tolerance compliance suite
N4903B-J10
N4903B-J11
1
N4903B-J20
1
N4903B-J12
1
Analyzer capabilities SER/FER analysis
Bit recovery mode
N4903B-A02
N4903B-A01
—
Upgrade from N4903B Upgrade from N4903A version
(factory, S/N will change)
N4903B-UAB
2
Upgrade options for N4903B Description BERT with built-in and
tunable CDR N4903BU
Pattern Generator
N4903BU
Data rate To 12.5 Gb/s (N4903B-C13/ N4903B-G13) from 7 Gb/s
(N4903B-C07/ N4903B-G07)
To 14.2 Gb/s data rate extension (factory)
N4903BU-U13
N4903BU-D14
3
Generator capabiltiies To PRBS and pattern on aux data output
To half-rate clock with variable duty cycle
N4903BU-U02
N4903BU-U03
Jitter tolerance options To RJ,sRJ,PJ1,PJ2,SJ,BUJ injection
To SSC, rSSC generation
To interference channel
To jitter tolerance compliance suite
N4903BU -U10
N4903BU-U11
N4903BU-J20
N4903BU-U12
Analyzer capabilities To SER/FER analysis
To bit recovery mode
To analysis of 128B/132B coded pattern
To BERT from pattern generator (factory)
N4903BU-UA2
N4903BU-UA1
N4903BU-UA3
—
—
—
—
N4903BU-UED
1. nly available with ption J10
2. Reuires N4903A-J10/-10 or N4903B-J10 and N4903A-TR/-TR or N4903B-TR upgrade does not include N4915A-008 short cable it for ISI ports
3. Reuires ption -G13 -13 or -13
Table 30. ption information