Technical data

Error Messages 34
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 935
-148 Character data not allowed A legal character data element was encountered where prohibited by
the oscilloscope.
-150 String data error This error can be generated when parsing a string data element. This
particular error message is used if the oscilloscope cannot detect a
more specific error.
-151 Invalid string data A string data element was expected, but was invalid for some reason.
For example, an END message was received before the terminal quote
character.
-158 String data not allowed A string data element was encountered but was not allowed by the
oscilloscope at this point in parsing.
-160 Block data error This error can be generated when parsing a block data element. This
particular error message is used if the oscilloscope cannot detect a
more specific error.
-161 Invalid block data
-168 Block data not allowed A legal block data element was encountered but was not allowed by the
oscilloscope at this point in parsing.
-170 Expression error This error can be generated when parsing an expression data element.
It is used if the oscilloscope cannot detect a more specific error.
-171 Invalid expression
-178 Expression data not allowed Expression data was encountered but was not allowed by the
oscilloscope at this point in parsing.
-200 Execution error This is a generic syntax error which is used if the oscilloscope cannot
detect more specific errors.
-212 Arm ignored
-213 Init ignored
-214 Trigger deadlock
-215 Arm deadlock
-220 Parameter error
-221 Settings conflict
-222 Data out of range Indicates that a legal program data element was parsed but could not be
executed because the interpreted value is outside the legal range
defined by the oscilloscope.
-223 Too much data Indicates that a legal program data element of block, expression, or
string type was received that contained more data than the oscilloscope
could handle due to memory or related oscilloscope-specific
requirements.
-224 Illegal parameter value
-230 Data corrupt or stale
Table 29 Error Messages (continued)