Technical data

934 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
34 Error Messages
List of Error Messages
Table 29 a list of the error messages that are returned by the parser on
this oscilloscope.
Table 29 Error Messages
0 No error The error queue is empty. Every error in the queue has been read
(SYSTEM:ERROR? query) or the queue was cleared by power-up or
*CLS.
-100 Command error This is the generic syntax error used if the oscilloscope cannot detect
more specific errors.
-101 Invalid character A syntactic element contains a character that is invalid for that type.
-102 Syntax error An unrecognized command or data type was encountered.
-103 Invalid separator The parser was expecting a separator and encountered an illegal
character.
-104 Data type error The parser recognized a data element different than one allowed. For
example, numeric or string data was expected but block data was
received.
-105 GET not allowed A Group Execute Trigger was received within a program message.
-108 Parameter not allowed More parameters were received than expected for the header.
-109 Missing parameter Fewer parameters were received than required for the header.
-112 Program mnemonic too long The header or character data element contains more than twelve
characters.
-113 Undefined header The header is syntactically correct, but it is undefined for the
oscilloscope. For example, *XYZ is not defined for the oscilloscope.
-121 Invalid character in number An invalid character for the data type being parsed was encountered.
For example, a "9" in octal data.
-123 Numeric overflow Number is too large or too small to be represented internally.
-124 Too many digits The mantissa of a decimal numeric data element contained more than
255 digits excluding leading zeros.
-128 Numeric data not allowed A legal numeric data element was received, but the oscilloscope does
not accept one in this position for the header.
-131 Invalid suffix The suffix does not follow the syntax described in IEEE 488.2 or the
suffix is inappropriate for the oscilloscope.
-138 Suffix not allowed A suffix was encountered after a numeric element that does not allow
suffixes.
-141 Invalid character data Either the character data element contains an invalid character or the
particular element received is not valid for the header.
-144 Character data too long