Technical data

Waveform Memory Commands 33
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 921
:WMEMory<N>:SAVE
Command :WMEMory<N>:SAVE {CHANnel<N> |CLOCk | FUNCtion<N> | MTRend | MSPectrum
| WMEMory<N>}
The :WMEMory<N>:SAVE command stores the specified channel, waveform
memory, or function to the waveform memory. You can save waveforms to
waveform memories regardless of whether the waveform memory is
displayed or not.
The :WAVeform:VIEW command determines the view of the data being
saved.
<N> CHANnel<N> is an integer, 1 - 4.
FUNCtion<N> and WMEMory<N> are:
Integers, 1 - 4, representing the selected function or waveform memory.
MTRend and MSPectrum sources are only available if the oscilloscope has
the EZJIT option installed and the feature is enabled.
The CLOCk source is only available if the oscilloscope has the High Speed
Serial option installed and the feature is enabled.
Example This example saves channel 1 to waveform memory 4.
myScope.WriteString ":WMEMORY4:SAVE CHANNEL1"