Technical data

90 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
4 LAN, USB, and GPIB Interfaces
Bus Commands
The following commands are IEEE 488.1 bus commands (ATN true).
IEEE 488.2 defines many of the actions that are taken when these
commands are received by the oscilloscope.
Device Clear
The device clear (DCL) and selected device clear (SDC) commands clear
the input buffer and output queue, reset the parser, and clear any pending
commands. If either of these commands is sent during a digitize operation,
the digitize operation is aborted.
Group Execute Trigger
The group execute trigger (GET) command arms the trigger. This is the
same action produced by sending the RUN command.
Interface Clear
The interface clear (IFC) command halts all bus activity. This includes
unaddressing all listeners and the talker, disabling serial poll on all
devices, and returning control to the system computer.