Technical data

Trigger Commands 31
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 863
:TRIGger:WINDow:SOURce
Command :TRIGger:WINDow[{1 | 2}]:SOURce CHANnel<N>
This command specifies the channel source used to trigger the oscilloscope
with the window trigger.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<N> An integer, 1 - 4.
Query
:TRIGger:WINDow:SOURce?
The query returns the currently defined channel source for the window
trigger.
Returned Format
[:TRIGger:WINDow:SOURce] CHANnel<N><NL>