Technical data

844 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
31 Trigger Commands
:TRIGger:TIMeout:TIME
Command :TRIGger:TIMeout[{1 | 2}]:TIME <time>
This command lets you look for transition violations that are greater than
or less than the time specified.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<time> The time for the timeout trigger, in seconds.
Query
:TRIGger:TIMeout:TIME?
The query returns the currently defined time for the trigger trigger.
Returned Format
[:TRIGger:TIMeout:TIME] <time><NL>