Technical data

842 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
31 Trigger Commands
:TRIGger:TIMeout:CONDition
Command :TRIGger:TIMeout[{1 | 2}]:CONDition {HIGH | LOW | UNCHanged}
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
This command sets the condition used for the timeout trigger.
HIGH Trigger when the waveform has been high for a period time longer than
the time value which is set by the TRIGger:TIMeout:TIME command.
LOW Trigger when the waveform has been low for a period time longer than the
time value which is set by the TRIGger:TIMeout:TIME command.
UNCHanged Trigger when the waveform has not changed state for a period time longer
than the time value which is set by the TRIGger:TIMeout:TIME command.
Query
:TRIGger:TIMeout:CONDition?
The query returns the currently defined trigger condition for the timeout
trigger.
Returned Format
[:TRIGger:TIMeout:CONDition] {HIGH | LOW | UNCHanged}<NL>