Technical data

838 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
31 Trigger Commands
:TRIGger:STATe:LOGic
Command :TRIGger:STATe[{1 | 2}]:LOGic CHANnel<N>,{LOW | HIGH | DONTcare
| RISing | FALLing}
This command defines the logic state of the specified source for the state
pattern. The command produces a settings conflict on a channel that has
been defined as the clock.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<N> An integer, 1 - 4
Query
:TRIGger:STATe:LOGic? CHANnel<N>
The query returns the logic state definition for the specified source.
<N> N is the channel number, an integer in the range of 1 - 4.
Returned Format
[:TRIGger:STATe:LOGic CHANnel<N>,] {LOW | HIGH | DONTcare
| RISing | FALLing}<NL>