Technical data

Trigger Commands 31
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 837
:TRIGger:STATe:CLOCk
Command :TRIGger:STATe[{1 | 2}]:CLOCk {CHANnel<N>}
This command selects the source for the clock waveform in the State
Trigger Mode.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<N> An integer, 1 - 4.
Query
:TRIGger:STATe:CLOCk?
The query returns the currently selected clock source.
Returned Format
[:TRIGger:STATe:CLOCk] {CHANnel<N>}<NL>