Technical data

Trigger Commands 31
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 825
:TRIGger:SEQuence:RESet:EVENt
Command :TRIGger:SEQuence:RESet:EVENt {CHANnel<N>}, { HIGH | LOW | DONTcare }
This command defines the logical pattern used for an event Reset
condition.
You can specify for each channel (1-4) whether you want the value to be
high (1), low (0), or you don't care (X).
<N> An integer, 1 - 4.