Technical data

818 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
31 Trigger Commands
:TRIGger:RUNT:SOURce
Command :TRIGger:RUNT[{1 | 2}]:SOURce CHANnel<N>
This command sets the source for the runt trigger mode.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<N> An integer, 1 - 4.
Query
:TRIGger:RUNT:SOURce?
The query returns the currently selected source for the runt trigger mode.
Returned Format
[:TRIGger:RUNT:SOURce] CHANnel<N><NL>