Technical data

Trigger Commands 31
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 813
:TRIGger:PWIDth:TPOint
Command :TRIGger:PWIDth[{1 | 2}]:TPOint {EPULse | TIMeout}
This command specifies whether the pulse width trigger should occur at
the end of the pulse or at a specified timeout period. This command is
only available if the pulse direction is set to GTHan.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
Query
:TRIGger:PWIDth:TPOint?
The query returns the currently defined trigger on point for the pulse
width trigger.
Returned Format
[:TRIGger:PWIDth:TPOint] {EPULse | TIMeout}<NL>