Technical data

812 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
31 Trigger Commands
:TRIGger:PWIDth:SOURce
Command :TRIGger:PWIDth[{1 | 2}]:SOURce CHANnel<N>
This command specifies the channel source used to trigger the oscilloscope
with the pulse width trigger.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<N> An integer, 1 - 4.
<level> A real number for the voltage through which the pulse must pass before
the oscilloscope will trigger.
Query
:TRIGger:PWIDth:SOURce?
The query returns the currently defined channel source for the pulse
width trigger.
Returned Format
[:TRIGger:PWIDth:SOURce] CHANnel<N><NL>