Technical data

810 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
31 Trigger Commands
:TRIGger:PWIDth:DIRection
Command :TRIGger:PWIDth[{1 | 2}]:DIRection {GTHan | LTHan}
This command specifies whether a pulse must be wider or narrower than
the width value to trigger the oscilloscope.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
Query
:TRIGger:PWIDth:DIRection?
The query returns the currently defined direction for the pulse width
trigger.
Returned Format
[:TRIGger:PWIDth:DIRection] {GTHan | LTHan}<NL>