Technical data

808 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
31 Trigger Commands
:TRIGger:PATTern:LOGic
Command :TRIGger:PATTern[{1 | 2}]:LOGic CHANnel<N>},{HIGH | LOW | DONTcare
| RISing | FALLing}
This command defines the logic criteria for a selected channel.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
<N> An integer, 1 - 4.
Query
:TRIGger:PATTern:LOGic? CHANnel<N>}
The query returns the current logic criteria for a selected channel.
Returned Format
[:TRIGger:PATTern:LOGic CHANnel<N>,] {HIGH | LOW | DONTcare
| RISing | FALLing}<NL>