Technical data

800 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
31 Trigger Commands
:TRIGger:EDGE:SLOPe
Command :TRIGger:EDGE[{1 | 2}]:SLOPe {POSitive | NEGative | EITHer}
The :TRIGger:EDGE:SLOPe command sets the slope of the trigger source
previously selected by the :TRIGger:EDGE:SOURce command. The LINE
source has no slope.
The optional [{1 | 2}] parameter sets whether the trigger mode goes with
the TERM1 or TERM2 state if sequential triggering is being used.
Query
:TRIGger:EDGE:SLOPe?
The query returns the currently selected slope for the specified edge
trigger source.
Returned Format
[:TRIGger:EDGE:SLOPe] {POSitive | NEGative | EITHer}<NL>