Technical data

770 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
31 Trigger Commands
Summary of
Trigger Modes
and Commands
Make sure the oscilloscope is in the proper trigger mode for the command
you want to send. One method of ensuring that the oscilloscope is in the
proper trigger mode is to send the :TRIGger:MODE command in the same
program message as the parameter to be set.
For example, these commands place the instrument in the proper
triggering mode you select:
:TRIGger:MODE <Trigger_mode>
<Trigger_mode> The trigger modes include COMM, DELay, EDGE, GLITch, PATTern,
PWIDth, RUNT, SEQuence, SHOLd, STATe, TIMeout, TRANsition, TV, and
WINDow. Each mode is described with its command set in this chapter.