Technical data

752 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
29 System Commands
:SYSTem:PRESet
Command :SYSTem:PRESet [ {DEFault|FACtory} ]
The :SYSTem:PRESet command performs a Default Setup just like the
oscilloscope's Default Setup key. Using this command does not change any
of the control settings found in the User Preferences dialog box, display
color settings, screen options, probe skew, probe external adapter settings
for differential probes, or probe internal attenuation and gain settings for
differential probes. The parameters are optional. A default reset will occur
if no parameters are used or the DEFault parameter is used. A factory
default occurs with the FACtory parameter.
Example This example performs an oscilloscope default setup.
myScope.WriteString ":SYSTEM:PRESet"