Technical data

Serial Data Equalization Commands 28
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 737
:SPRocessing:FFEQualizer:TAP:TDELay
Command :SPRocessing:FFEQualizer:TAP:TDELay <delay_value>
The :FFEQualizer:TAP:TDELay command is only needed if the
FFEQualizer:TAP:TDMode is set to CUSTom. To determine what this value
should be, use the equation: tap delay = 1/[(data rate)x(# of taps per bit)].
To understand more about this parameter, consult the N5461A Infiniium
Serial Data Equalization User's Guide.
<delay_value> A real number
Query
:SPRocessing:FFEQualizer:TAP:TDELay?
The :SPRocessing:FFEQualizer:TAP:TDELay? query returns the current
value for the tap delay.