Technical data

Serial Data Equalization Commands 28
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 715
:SPRocessing:DFEQualizer:NTAPs
Command :SPRocessing:DFEQualizer:NTAPs <number>
The :DFEQualizer:NTAPs command sets the number of taps to be used in
the DFE algorithm.
DFE tap indices always begin with 1 and extend to the number of taps.
<number> An integer between 2 and 40
Example This example sets the number of DFE taps to 3.
myScope.WriteString ":SPRocessing:DFEQualizer:NTAPs 3"
Query :SPRocessing:DFEQualizer:NTAPs?
The :SPRocessing:DFEQualizer:NTAPs? query returns the number of DFE
taps.