Technical data

Serial Bus Commands 26
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 693
:SBUS<N>:SPI:TYPE
Command :SBUS<N>:SPI:TYPE <value>
<value> ::= {WIRE2 | WIRE3 | WIRE4}
The :SBUS<N>:SPI:TYPE command specifies whether the type of SPI to
decode.
<N> An integer, 1 - 4.
Example To set the 3- wire SPI decode type:
myScope.WriteString ":SBUS1:SPI:TYPE WIRE3"
Query :SBUS<N>:SPI:TYPE?
The :SBUS<N>:SPI:TYPE? query returns the decode type setting.
Returned Format
[:SBUS<N>:SPI:TYPE] <value><NL>
See Also • ":SBUS<N>:SPI:BITorder" on page 684
• ":SBUS<N>:SPI:SOURce:CLOCk" on page 688
• ":SBUS<N>:SPI:SOURce:DATA" on page 689
• ":SBUS<N>:SPI:SOURce:FRAMe" on page 690
• ":SBUS<N>:SPI:SOURce:MISO" on page 691
• ":SBUS<N>:SPI:SOURce:MOSI" on page 692