Technical data

692 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
26 Serial Bus Commands
:SBUS<N>:SPI:SOURce:MOSI
Command :SBUS<N>:SPI:SOURce:MOSI <source>
<source> ::= {CHANnel<N> | FUNCtion<N> | WMEMory<N>}
The :SBUS<N>:SPI:SOURce:MOSI command sets the source for the SPI
serial MOSI data.
You can also use the equivalent :SBUS<N>:SPI:SOURce:DATA command to
set the MOSI data source.
<N> CHANnel<N> is an integer, 1 - 4.
FUNCtion<N> and WMEMory<N> are an integer, 1 - 4, representing the
selected function or waveform memory.
Query
:SBUS<N>:SPI:SOURce:MOSI?
The :SBUS<N>:SPI:SOURce:MOSI? query returns the current source for the
SPI serial MOSI data.
Returned Format
[:SBUS<N>:SPI:SOURce:MOSI] <source><NL>
See Also • ":SBUS<N>:SPI:SOURce:DATA" on page 689
• ":SBUS<N>:SPI:SOURce:MISO" on page 691
• ":SBUS<N>:SPI:SOURce:CLOCk" on page 688
• ":SBUS<N>:SPI:SOURce:FRAMe" on page 690