Technical data

Serial Bus Commands 26
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 689
:SBUS<N>:SPI:SOURce:DATA
Command :SBUS<N>:SPI:SOURce:DATA <source>
<source> ::= {CHANnel<N> | FUNCtion<N> | WMEMory<N>}
The :SBUS<N>:SPI:SOURce:DATA command sets the source for the SPI
serial MOSI data.
This command is the same as the :SBUS<N>:SPI:SOURce:MOSI command.
<N> CHANnel<N> is an integer, 1 - 4.
FUNCtion<N> and WMEMory<N> are an integer, 1 - 4, representing the
selected function or waveform memory.
Query
:SBUS<N>:SPI:SOURce:DATA?
The :SBUS<N>:SPI:SOURce:DATA? query returns the current source for the
SPI serial MOSI data.
Returned Format
[:SBUS<N>:SPI:SOURce:DATA] <source><NL>
See Also • ":SBUS<N>:SPI:SOURce:MOSI" on page 692
• ":SBUS<N>:SPI:SOURce:MISO" on page 691
• ":SBUS<N>:SPI:SOURce:CLOCk" on page 688
• ":SBUS<N>:SPI:SOURce:FRAMe" on page 690