Technical data

688 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
26 Serial Bus Commands
:SBUS<N>:SPI:SOURce:CLOCk
Command :SBUS<N>:SPI:SOURce:CLOCk <source>
<source> ::= {CHANnel<N> | FUNCtion<N> | WMEMory<N>}
The :SBUS<N>:SPI:SOURce:CLOCk command sets the source for the SPI
serial clock.
<N> CHANnel<N> is an integer, 1 - 4.
FUNCtion<N> and WMEMory<N> are an integer, 1 - 4, representing the
selected function or waveform memory.
Query
:SBUS<N>:SPI:SOURce:CLOCk?
The :SBUS<N>:SPI:SOURce:CLOCk? query returns the current source for
the SPI serial clock.
Returned Format
[:SBUS<N>:SPI:SOURce:CLOCk] <source><NL>
See Also • ":SBUS<N>:SPI:CLOCk:SLOPe" on page 685
• ":SBUS<N>:SPI:CLOCk:TIMeout" on page 686
• ":SBUS<N>:SPI:SOURce:FRAMe" on page 690
• ":SBUS<N>:SPI:SOURce:MOSI" on page 692
• ":SBUS<N>:SPI:SOURce:MISO" on page 691
• ":SBUS<N>:SPI:SOURce:DATA" on page 689