Technical data

684 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
26 Serial Bus Commands
:SBUS<N>:SPI:BITorder
Command :SBUS<N>:SPI:BITorder <order>
<order> ::= {LSB | MSB}
The :SBUS<N>:SPI:BITorder command selects the bit order, most significant
bit first (MSB) or least significant bit first (LSB), used when displaying
data in the serial decode waveform and in the Lister.
<N> An integer, 1 - 4.
Query
:SBUS<N>:SPI:BITorder?
The :SBUS<N>:SPI:BITorder? query returns the current SPI decode bit
order.
Returned Format
[:SBUS<N>:SPI:BITorder] <order><NL>
See Also • ":SBUS<N>:MODE" on page 678