Technical data

Serial Bus Commands 26
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 683
:SBUS<N>:SPI Commands
• ":SBUS<N>:SPI:BITorder" on page 684
• ":SBUS<N>:SPI:CLOCk:SLOPe" on page 685
• ":SBUS<N>:SPI:CLOCk:TIMeout" on page 686
• ":SBUS<N>:SPI:FRAMe:STATe" on page 687
• ":SBUS<N>:SPI:SOURce:CLOCk" on page 688
• ":SBUS<N>:SPI:SOURce:DATA" on page 689
• ":SBUS<N>:SPI:SOURce:FRAMe" on page 690
• ":SBUS<N>:SPI:SOURce:MISO" on page 691
• ":SBUS<N>:SPI:SOURce:MOSI" on page 692
• ":SBUS<N>:SPI:TYPE" on page 693
• ":SBUS<N>:SPI:WIDTh" on page 694
NOTE
These commands are only valid when the low-speed IIC and SPI serial decode option has
been licensed.