Technical data

682 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
26 Serial Bus Commands
:SBUS<n>:IIC:SOURce:DATA
Command :SBUS<n>:IIC:SOURce:DATA <source>
<source> ::= {CHANnel<N> | FUNCtion<N> | WMEMory<N>}
The :SBUS<n>:IIC:SOURce:DATA command sets the source for IIC serial
data (SDA).
<N> CHANnel<N> is an integer, 1 - 4.
FUNCtion<N> and WMEMory<N> are an integer, 1 - 4, representing the
selected function or waveform memory.
Example This example selects channel 1 as the source for IIC serial data.
myScope.WriteString ":SBUS1:IIC:SOURce:DATA CHANnel1"
Query :SBUS<n>:IIC:SOURce:DATA?
The :SBUS<n>:IIC:SOURce:DATA? query returns the current source for IIC
serial data.
Returned Format
[:SBUS<n>:IIC:SOURce:DATA] <source><NL>
See Also • ":SBUS<n>:IIC:SOURce:CLOCk" on page 681