Technical data

Serial Bus Commands 26
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 681
:SBUS<n>:IIC:SOURce:CLOCk
Command :SBUS<n>:IIC:SOURce:CLOCk <source>
<source> ::= {CHANnel<N> | FUNCtion<N> | WMEMory<N>}
The :SBUS<n>:IIC:SOURce:CLOCk command sets the source for the IIC
serial clock (SCL).
<N> CHANnel<N> is an integer, 1 - 4.
FUNCtion<N> and WMEMory<N> are an integer, 1 - 4, representing the
selected function or waveform memory.
Example This example selects channel 2 as the source for IIC serial clock.
myScope.WriteString ":SBUS1:IIC:SOURce:CLOCk CHANnel2"
Query :SBUS<n>:IIC:SOURce:CLOCk?
The :SBUS<n>:IIC:SOURce:CLOCk? query returns the current source for the
IIC serial clock.
Returned Format
[:SBUS<n>:IIC:SOURce:CLOCk] <source><NL>
See Also • ":SBUS<n>:IIC:SOURce:DATA" on page 682