Technical data

678 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
26 Serial Bus Commands
:SBUS<N>:MODE
Command :SBUS<N>:MODE <mode>
<mode> ::= {IIC | SPI}
The :SBUS<N>:MODE command determines the decode mode for the serial
bus.
Query
:SBUS<N>:MODE?
The :SBUS<n>:MODE? query returns the current serial bus decode mode
setting.
Returned Format
[:SBUS<N>:MODE] <mode><NL>
<mode> ::= {IIC | SPI}
See Also • ":SBUS<N>:IIC Commands" on page 679
• ":SBUS<N>:SPI Commands" on page 683
NOTE
This command is only valid when a serial decode option has been licensed.