Technical data

Root Level Commands 25
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 667
:SINGle
Command :SINGle
The :SINGle command causes the oscilloscope to make a single acquisition
when the next trigger event occurs. However, this command does not set
the :TRIGger:SWEep to SINGle.
Example This example sets up the oscilloscope to make a single acquisition when
the next trigger event occurs.
myScope.WriteString ":SINGLE"
See Also :TRIGger:SWEep AUTO|TRIGgered|SINGle for how to turn the single sweep
off.