Technical data

Root Level Commands 25
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 645
:ADER?
(Acquisition Done Event Register)
Query
:ADER?
The :ADER? query reads the Acquisition Done Event Register and returns
1 or 0. After the Acquisition Done Event Register is read, the register is
cleared. The returned value 1 indicates an acquisition completed event has
occurred and 0 indicates an acquisition completed event has not occurred.
Once the Done bit is set, it is cleared only by doing :ADER? or by sending
a *CLS command.
Returned Format
{1 | 0}<NL>