Technical data

Measure Commands 24
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 585
:MEASure:RJDJ:UNITs
Command
:MEASure:RJDJ:UNITs {SECond | UNITinterval}
The :MEASure:RJDJ:UNITs command sets the unit of measure for RJDJ
measurements to seconds or unit intervals.
Example This example sets the RJDJ units to unit interval.
myScope.WriteString ":MEASURE:RJDJ:UNITS UNITINTERVAL"
Query :MEASure:RJDJ:UNITs?
The :MEASure:RJDJ:UNITs? query returns the units of measure being used
for the RJDJ measurements.
Returned Format
[:MEASure:RJDJ:UNITs] {SECond | UNITinterval}<NL>
Example This example places the current units of measure for the RJDJ
measurements in the varUnits variable and displays it on the computer's
screen.
myScope.WriteString ":SYSTEM:HEADER OFF" ' Response headers off.
myScope.WriteString ":MEASURE:RJDJ:UNITS?"
varUnits = myScope.ReadNumber
Debug.Print FormatNumber(varUnits, 0)
NOTE
This command is only available when the N5400A/N5401A Software is installed.