Technical data

578 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
24 Measure Commands
:MEASure:RJDJ:MODe
Command
:MEASure:RJDJ:MODe {TIE | PERiod | NUI[,<ui>]}
The :MEASure:RJDJ:MODe command sets the RJDJ measurement mode. If
NUI is selected then <ui> selects the number of unit intervals (for
example: :MEASure:RJDJ:MODe NUI,5.
Example This example sets the RJDJ mode to TIE.
myScope.WriteString ":MEASURE:RJDJ:MODe TIE"
Query :MEASure:RJDJ:MODe?
The :MEASure:RJDJ:MODe? query returns the mode of the RJDJ
measurements.
NOTE
This command is only available when the N5400A/N5401A Software is installed.