Technical data

568 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
24 Measure Commands
36 Result invalid. Awaiting completion of averaging.
39 Result invalid. Need jitter package to make this measurement or must be
in jitter mode to make this measurement.
40 Current measurement is not on screen.
41 Not enough points available to recover the clock.
42 The loop bandwidth of the PLL is too high to recover the clock.
43 RJDJ pattern not found in data.
45 Clock recovery mode is not permitted.
46 Too much jitter to make a RJDJ separation.
Table 23 Result States (continued)
Code Description