Technical data

556 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
24 Measure Commands
<result_state> If SENDvalid is ON, the result state is returned with the measurement
result. See the :MEASure:RESults table in this chapter for a list of the
result states.
Example This example places the current phase angle value between channel 1 and
channel 2 in the variable, varValue, then prints the contents of the
variable to the computer's screen.
myScope.WriteString ":SYSTEM:HEADER OFF" ' Response headers off.
myScope.WriteString ":MEASURE:PHASE? CHANNEL1,CHANNEL2"
varValue = myScope.ReadNumber
Debug.Print FormatNumber(varValue, 0)