Technical data

520 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
24 Measure Commands
:MEASure:JITTer:SPECtrum:HORizontal:RANGe
Command
:MEASure:JITTer:SPECtrum:HORizontal:RANGe <range>
The :MEASure:JITTer:SPECtrum:HORizontal:RANGe command sets the jitter
spectrum horizontal range.
<range> A real number for the horizontal frequency range in Hertz.
Example This example sets the jitter spectrum horizontal range to 10 GHz (1
GHz/div).
myScope.WriteString ":MEASURE:JITTER:SPECTRUM:HORIZONTAL:RANGE 10E9"
Query :MEASure:JITTer:SPECtrum:HORizontal:RANGe?
The :MEASure:JITTer:SPECtrum:HORizontal:RANGe? query returns the
current jitter spectrum horizontal range setting.
Returned format
[:MEASure:JITTer:SPECtrum:HORizontal:RANGe] <value><NL>
<value> The jitter spectrum horizontal range setting.
Example This example places the current setting of the jitter trend horizontal range
in the variable varValue, then prints the contents of the variable to the
computer's screen.
myScope.WriteString ":SYSTem:HEADer OFF"
myScope.WriteString ":MEASURE:JITTER:SPECTRUM:HORIZONTAL:RANGE?"
varValue = myScope.ReadNumber
Debug.Print FormatNumber(varValue, 0)
NOTE
This command is only available when the E2681A Jitter Analysis Software or the
N5400A/N5401A Software is installed.