Technical data

Measure Commands 24
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 497
:MEASure:FFT:THReshold
Command :MEASure:FFT:THReshold <threshold_value>
The :MEASure:FFT:THReshold command sets the peak search threshold
value in dB. The dB after the threshold value is optional.
<threshold
_value>
A real number specifying the threshold for peaks.
Query
:MEASure:FFT:THReshold?
The :MEASure:FFT:THReshold? query returns the peak search threshold
value.
Returned Format
[:MEASure:FFT:THReshold] <threshold_value><NL>
These :MEASure commands also operate on FFT functions:
See Also Also see the example for :MEASure:FFT:DFRequency in this chapter.
Measure Command Measurement Performed
:TMAX The frequency of the maximum value in the spectrum.
:TMIN The frequency of the minimum value in the spectrum.
:VMAX The maximum value in the spectrum.
:VMIN The minimum value in the spectrum.
:VPP The range of values in the spectrum.
:VTIM The value at a specified frequency.