Technical data

4 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
• Chapter 25, “Root Level Commands,” starting on page 643
• Chapter 26, “Serial Bus Commands,” starting on page 675
• Chapter 27, “Self- Test Commands,” starting on page 695
• Chapter 28, “Serial Data Equalization Commands,” starting on page 699
• Chapter 29, “System Commands,” starting on page 743
• Chapter 30, “Time Base Commands,” starting on page 757
• Chapter 31, “Trigger Commands,” starting on page 769
• Chapter 32, “Waveform Commands,” starting on page 867
• Chapter 33, “Waveform Memory Commands,” starting on page 917
Chapter 34, “Error Messages,” starting on page 927, describes error
messages.
Chapter 35, “Sample Programs,” starting on page 939, shows example
programs in various languages using the VISA COM, VISA, and SICL
libraries.
Finally, Chapter 36, “Reference,” starting on page 1069, contains file
format descriptions.
See Also • For more information on using the SICL, VISA, and VISA COM libraries
in general, see the documentation that comes with the Agilent IO
Libraries Suite.
• For information on controller PC interface configuration, see the
documentation for the interface card used (for example, the Agilent
82350A GPIB interface).
• For information on oscilloscope front-panel operation, see the User's
Guide.
• For detailed connectivity information, refer to the Agilent Technologies
USB/LAN/GPIB Connectivity Guide. For a printable electronic copy of
the Connectivity Guide, direct your Web browser to "www.agilent.com"
and search for "Connectivity Guide".
• For the latest versions of this and other manuals, see:
"http://www.agilent.com/find/Infiniium- manuals"