Technical data

398 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
23 Mask Test Commands
:MTESt:AMASk:CREate
Command :MTESt:AMASk:CREate
The :MTESt:AMASk:CREate command automatically constructs a mask
around the current selected channel, using the tolerance parameters
defined by the AMASk:XDELta, AMASk:YDELta, and AMASk:UNITs
commands. The mask only encompasses the portion of the waveform
visible on the display, so you must ensure that the waveform is acquired
and displayed consistently to obtain repeatable results.
The :MTESt:SOURce command selects the channel and should be set before
using this command.
Example This example creates an automask using the current XDELta and YDELta
units settings.
myScope.WriteString ":MTEST:AMASK:CREATE"