Technical data

372 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
20 Limit Test Commands
:LTESt:MEASurement
Command :LTESt:MEASurement {MEAS1 | MEAS2 | MEAS3 | MEAS4 | MEAS5}
The :LTESt:MEASurement command selects the current source for Limit
Test for the ULIMit and LLIMit commands. It selects one of the active
measurements as referred to by their position in the measurement window
on the bottom of the screen. Measurements are numbered from left to
right.
Example The following example selects the first measurement as the source for the
limit testing commands.
myScope.WriteString ":LTEST:MEASUREMENT MEAS1"
Query :LTESt:MEASurement?
The query returns the currently selected measurement source.
Returned Format
[:LTESt:MEASurement]{MEAS1 | MEAS2 | MEAS3 | MEAS4 | MEAS5} <NL>
Example The following example returns the currently selected measurement source
for the limit testing commands.
Dim strSOURCE As String
myScope.WriteString ":LTEST:MEASUREMENT?"
strSOURCE = myScope.ReadString
Debug.Print strSOURCE
See Also Measurements are started in the Measurement Subsystem.