Technical data

InfiniiScan (ISCan) Commands 19
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 355
:ISCan:NONMonotonic:HYSTeresis
Command :ISCan:NONMonotonic:HYSTeresis <value>
The :ISCan:NONMonotonic:HYSTeresis command sets the hysteresis value
used for the Non- monotonic Edge trigger.
<value> is a real number for the hysteresis.
Example The following example sets the hysteresis value used by the
Non-monotonic trigger mode to 10 mV.
myScope.WriteString ":ISCAN:NONMONOTONIC:HYSTERESIS 1E-2"
Query :ISCan:NONMonotonic:HYSTersis?
The query returns the hysteresis value used by the Non- monotonic Edge
trigger mode.
Returned Format
[:ISCan:NONMonotonic:HYSTeresis]<value><NL>
Example The following example returns and prints the value of the hysteresis.
myScope.WriteString ":SYSTEM:HEADER OFF" ' Response headers off.
myScope.WriteString ":ISCAN:NONMONOTONIC:HYSTERESIS?"
varValue = myScope.ReadNumber
Debug.Print FormatNumber(varValue, 0)