Technical data

32 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
1 What's New
What's New in Version 3.11
New command descriptions for Version 3.11 of the Infiniium
90000A/90000X Series oscilloscope software appear below.
New Commands
Changed
Commands
Command Description
:CHANnel<N>:ISIM:PEXTracti
on (see page 191)
Selects a channel's InfiniiSim port extraction.
:MEASure:HISTogram:MODE
(see page 508)
Returns the measurement histogram's Mode value.
Command Description
:BUS:B<N>:TYPE (see
page 164)
The MPHY protocol type has been added for the MIPI M-PHY
serial decode selection.
:FUNCtion<N>:FFT:WINDow
(see page 301)
The HAMMing window mode is now a valid selection.
:MEASure:JITTer:SPECtrum:W
INDow (see page 525)
The HAMMing window mode is now a valid selection.