Technical data

316 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
16 Function Commands
:FUNCtion<N>:MTRend
Command :FUNCtion<N>:MTRend {MEAS1 | MEAS2 | MEAS3 | MEAS4 | MEAS5}
The :FUNCtion<N>:MTRend command adds a Meas Trend function that
shows measurement values for a waveform (based on measurement
threshold settings) as the waveform progresses across the screen. For
every cycle, a measurement is made, and the value is displayed on the
screen for the cycle.
If a measurement cannot be made for part of a waveform, the trend
function output is a hole (that is, no value) until a measurement can be
made.
<N> An integer, 1 - 4, representing the selected function.
Example This example sets up a trend function of the first measurement.
myScope.WriteString ":FUNCtion2:MTRend MEAS1"