Technical data

30 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
1 What's New
Changed
Commands
:MEASure:RJDJ:SCOPe:RJ
(see page 581)
Specifies the removal of the oscilloscope's calibrated random
jitter from the reported RJ.
:SBUS<N> Commands (see
page 675)
For setting up IIC and SPI serial decode.
Command Description
Command Description
:CHANnel<N>:PROBe:HEAD:
SELect (see page 212)
Now lets you select probe heads by the labels given with the
:CHANnel<N>:PROBe:HEAD:ADD command.
:MEASure:HISTogram:HITS
(see page 500)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:M1S
(see page 501)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:M2S
(see page 502)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:M3S
(see page 503)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MAX
(see page 504)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MEAN
(see page 505)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MEDian
(see page 506)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MIN
(see page 507)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:MODE
(see page 508)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:PEAK
(see page 509)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:PP (see
page 510)
Can now use this command with Meas Histogram math
functions.
:MEASure:HISTogram:STDDev
(see page 512)
Can now use this command with Meas Histogram math
functions.
:MEASure:RJDJ:ALL (see
page 571)
There are two possible additional measurement results, Scope
RN(rms) and DDPWS.
:TRIGger:MODE (see
page 780)
Added the SBUS1, SBUS2, SBUS3, and SBUS4 selections for
triggering on serial buses.