Technical data

Function Commands 16
Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference 289
DIFFerential1 refers to the differential signal between channels 1 and 3
(and COMMonmode3 refers to the common mode channel between these
same channels). DIFFerential2 refers to the differential signal between
channels 2 and 4 (and COMMonmode4 refers to the common mode
channel between these same channels).
Waveform
Memory
Operands
WMEMory<N>, where N is an integer, 1 - 4.
Function
Operands
FUNCtion<N>, where N is an integer, 1 - 3.
A function may be used as a source for another function, subject to the
following constraints:
• F4 can have F1, F2, or F3 as an operand.
• F3 can have F1 or F2 as an operand.
• F2 can have F1 as an operand.
• F1 cannot have any other function as an operand.
Constant
Operands
Constant operands can be a real number from - 1E6 to 1E12.
Jitter
Measurement
Trend and Jitter
Spectrum
Operands
The jitter measurement trend, MTRend, and jitter spectrum, MSPectrum,
operands are only available if the oscilloscope has the EZJIT option
installed and the feature is enabled.