Technical data

262 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
14 Disk Commands
:DISK:SAVE:SETup
Command :DISK:SAVE:SETup "<file_name>"
The :DISK:SAVE:SETup command saves the current oscilloscope setup to a
disk. The file will have a .set extension.
<file_name> A quoted ASCII string with a maximum of 254 characters including the
entire path name, if used. The filename assumes the present working
directory if a path does not precede the file name. The default path is C:\
SCOPE\SETUP.
Example This example saves the channel 1 waveform to SETUP1 on the disk.
myScope.WriteString ":DISK:SAVE:SETUP ""SEUP1"""