Technical data

260 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
14 Disk Commands
:DISK:SAVE:MEASurements
Command :DISK:SAVE:MEASurements "<file_name>"
The DISK:SAVE:MEASurements command saves the measurements shown
in the measurements tab at the bottom of the oscilloscope screen in a
comma separated variables (CSV) file format. The csv extension is
supplied by the oscilloscope. The default path is C:\Document and
Settings\All Users\Shared Documents\Infiniium\Data.
<file_name> A quoted ASCII string with a maximum of 254 characters including the
entire path name, if used.
Example
myScope.WriteString ":DISK:SAVE:MEASURMENTS ""FILE1"""