Technical data

258 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
14 Disk Commands
:DISK:SAVE:JITTer
Command :DISK:SAVE:JITTer "<file_name>"
The DISK:SAVE:JITTer command saves the jitter measurements shown in
the RJDJ tab at the bottom of the oscilloscope screen along with the RJDJ
histograms in a comma separated variables (CSV) file format. The csv
extension is supplied by the oscilloscope. The default path is C:\Document
and Settings\All Users\Shared Documents\Infiniium\Data.
<file_name> A quoted ASCII string with a maximum of 254 characters including the
entire path name, if used.
Example
myScope.WriteString ":DISK:SAVE:JITTER ""FILE1"""