Technical data

246 Agilent Infiniium 90000 Series Oscilloscopes Programmer's Reference
13 Common Commands
*TRG
(Trigger)
Command
*TRG
The *TRG command has the same effect as the Group Execute Trigger
message (GET) or RUN command. It acquires data for the active waveform
display, if the trigger conditions are met, according to the current settings.
Example This example starts the data acquisition for the active waveform display
according to the current settings.
myScope.WriteString "*TRG"
NOTE
Trigger Conditions Must Be Met
When you send the *TRG command in Single trigger mode, the trigger conditions must be
met before the oscilloscope will acquire data.